MFD-GB-F-D-30-A-R

UL-555 Test Ratings

Fire Rating : 3 hrs
Max Velocity : 2000 fpm
Max Operating Pressure: 4 in. w.g (1000 pa)

Standard Construction

Frame

16 gauge (1.4 mm – 1.7 mm) thick galvanized steel.

Blades

Parallel operated 3 ‘V’ type blade made of 16 gauge (1.4 mm – 1.7 mm) thick galvanized steel.

Jamb Seals

Stainless steel.

Jack Shaft

12 mm diameter Galvanized steel shaft.

Spring

Mild steel Spring ( 30lb).

Thermal Response Device (TRD)

165°F.

Fusible Link

165°F (74°C)

Actuator

Honeywell (24V AC, 120V AC, 230V AC).

Sleeve

Minimum 0.9 mm, single section is field or factory installed.
Multiple section is factory installed.
Sleeve thickness as per NFPA table 3-4.6.3.

Limit Switches

For BMS open / close indication.

Optional Fittings

Retaining Angles

1½” x 1½” x 16 gauge (40 x 40 x 1.5 mm).

Blade Seals

Silicon rubber blade seals.

Indicator

Externally mounted open / close visible indicator.

Push Button

For manual reset of damper.

Transitions (R)

Neck adapter for round duct connections.

Junction Box

Model : MFD-GB-F-D-30-A/R UL 555 Damper meets the required standards of SMACNA,NFPA, IBC, BOCA, ICBO, UL.

Actuator location standard: Left side from rear view
(Jack shaft view)

Note :
FC : Fail Close in the event of Fire

Note : * Standard Fusible link temperature is 165°F
Above 165°F available upon customer request.