CONTACT US
ISO 9001 : 2008
CERTIFIED
Dual Duct Type
Type: Rectangular / Round
Construction: Galvanized Steel (GI) / Stainless Steel
Application: Light & Medium Duty
Dual Duct Terminals
Dual duct terminal units are used in a special type of air distribution system where the main system has both warm air and cold air separatly ducted to each termial unit. the flow of both warm air and cool air is modulated, delivering air to the VAV zone at variable air volumes as well as variable temperatures.
A dual duct with integral mixing is similar to the non-mixing type, but has an integral mixing section between the two supply valves and the discharge duct connection. The standard mixing dual duct should provide, at a downstream distance of three equivalent diameters from the dual duct, a uniform discharge air temperature profile (±1 °F).
0.9 mm thick galvanized sheet steel.
13 mm thick 32 kg/m³ density Acoustic liner.
0.9 mm thick galvanized sheet steel.
Flow grid multi point with 12 inlet holes in four concentric
circles.
12 mm diameter axle shaft made of galvanized steel.
12 mm diameter Brass bearings.
Neoprene Gasket.
Modulating / On-Off
Backnet DDC with suitable thermostat.
VAV with additional length insulated casing for sound
attenuation.
25 mm thick 32 kg/m³ density Acoustic liner.
0.9 mm thick aluminium extruded aerofoil multiple blades.
Slip-in type electric duct heater (230V AC 1 Phase or 400VAC 3 Phase)
Insulated internal walls surface with Galvanized perforated
sheet used for low noise applications to minimise breakout
noise.
Round inlet with round outlet and square inlet with square
outle
